Hydraulic Dip Moulding machine
Advantages of Dip Moulding
To produce plastic caps or similar products, dip moulding is, especially for large volumes, the most interesting technique. This is because:
- Low costs of prototyping (amending the moulds is still easy in this phase)
- Low production costs of the mould, in particular when compared to injection moulding
- Therefore, also of interest for large volumes (serial production)
- Short delivery times (also for follow-up orders)
- Material available in many colours, both gloss and matt
- Stress free (long life)
- High Production at low Investment
Dip Moulding Versus Injection Moulding
moulding is certainly an interesting option. For instance, the start-up costs for dip moulding are many times lower, as only a single-sided mould is required. The start-up costs for your new product are substantially lower, in part because during the pre- production phase, changes can be made at limited additional cost.
* Custom Built Machine can be offered by us.
Main Features:
- SS 316 Tank for Dipping Solution with Jacket to circulate cold water to maintain temperature of solution
- SS202 Water Tank
- Air Circulating Blowers in Ovens with adjustable speed Infinitely variable position, speed and pressures for all operations thru HMI with parameters storage facility
- Colour HMI
- Energy Saving Pump for low noise, minimum vibration, long oil life and long pump life
- SSR for Oven Heaters for energy saving and accurate controll
Major Technical Specifications
| Indexing Arm Stroke | 450 mm |
|---|---|
| Stooke Dipping Tank Stroke | 160 mm |
| Chilled Water Connection | 1/2 BSP |
| Indexing Arm RPM | Max. 6 |
| Hydraulic Drive Motor | 1.5KW,3ph, 1500RPM |
| Stroke of Indexing Arm & Dipping Tank | Control Thru LMPT |
| Cycle Control | Thru PLC & HMI |
| Max. Temperature | 300 C Thru PID Controller For Both Ovens Settable Individually |
| Overall Size | 3030mm x3000mm x1500mm |
| overall Weight | 1200kg |
| Mould Memory up to | 200 Receipe |
